Preview

Arctic and Subarctic Natural Resources

Advanced search

Properties and Structure of Butadiene-Nitrile Rubber Modified by Thermoexpanded Graphit

Abstract

In this paper, the results of study of operational properties and structure of a sealing rubber based on butadiene-nitrile caoutchouc and modified by thermally expanded graphite are presented. Modification of the rubber based on butadiene-nitrile caoutchouc by thermally expanded graphite produces an elastomeric material with high elasticity, frost-resistantсe and improved tribological characteristics. Tribological tests of the modified rubbers have shown the decrease of volume wear and friction coefficient. It is established that intercalation of caoutchouc in interlayer space of thermally expanded graphite and increase of degree of cristallinity on a surface of the modified samples is the reason of improvement of technical properties of elastomeric material. Therefore, the obtained results allow to recommend the presented elastomeric materials for production of mobile sealing elements, and to state that the sealing products made of it will be efficient and durable.

About the Authors

Anna Romanovna Haldeeva
Institute of Oil and Gas Problems SB RAS
Russian Federation


Maria Larionovna Davydova
Institute of Oil and Gas Problems SB RAS
Russian Federation


Marina Dmitrievna Sokolova
Institute of Oil and Gas Problems SB RAS
Russian Federation


References

1. Шастин Д.А., Вольфсон С.И., Макаров Т.В. Влияние модификации тройного этиленпропи- ленового каучука на физико-механические свойства резин // Вестник Казанского техноло- гического университета. – 2010. – №10. – С.257– 261.

2. Мансурова И.А., Копалина О.Ю., Фомин С.В., Хлебов Г.А., Ваганов В.Е., Дьячкова-Машкова Т.П. Влияние строения и химии поверхности угле- родных наноструктур на свойства эластомерных композиций на основе бутадиен-нитрильного каучука // Известия высших учебных заведений. Сер. Химия и химическая технология. – 2013. – Т.56, №5. – С.77–81.

3. Ханов А.М., Макарова Л.Е., Дегтярев А.И. и др. Особенности строения и использования терморасширенного графита // Вестник Перм- ского национального исследовательского поли- технического университета. Машиностроение, материаловедение. – 2012. – Т.14. №1. – С.92–106.

4. Jian Yang, Li-Qun Zhang, Jun-Hong Shi, Yan- Nan Quan, Lei-Lei Wang. Mechanical and func- tional properties of composites based on graphite and carboxylated acrylonitrile butadiene rubber // Journal of Applied Polymer Science, 2010. – V.116, issue 5. – P. 2706–2713.

5. Asish Malas, Chapal Kumar Das, Amit Dasb, Gert Heinrichb. Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties // Materials & Design. – 2012. – V. 39. – Р. 410–417.

6. Asish Malas and Chapal Kumar Das. Devel- opment of modified expanded graphite-filled solu- tion polymerized styrene butadiene rubber vulcani- zates in the presence and absence of carbon black // Polymer Engineering & Science. – 2004. – V. 54, issue 1. – Р. 33–41.

7. Морозостойкая резиновая смесь с термо- расширенным графитом: Пат. РФ №2356918. Бюл. – 2009, №15 / М.Д. Соколова, М.Л. Ларио- нова, Р.Ф. Биклибаева, Ч.Н. Барников, Л.Я. Мо- рова.

8. Savchenko D.V., Lonov S.G., Avdeev V.V. Electrical and Thermophysical Properties of Com- posite Materials Based on Nanocarbon Sheet with Low Percolation Threshloud // Rusnanotech-08. Nanotechnology International Forum 3–5.12. – 2008. – V. 1. – P.278–279.

9. Чвалун С.Н., Новокшонова Л.А., Коробко А.П., Бревнов П.Н. Полимерсиликатные нанокомпозиты: физико-механические аспекты синтеза полимеризацией in situ // Российский химиче- ский журнал. – 2008. – Т.LII, №5. – С.52–57.


Review

For citations:


Haldeeva A.R., Davydova M.L., Sokolova M.D. Properties and Structure of Butadiene-Nitrile Rubber Modified by Thermoexpanded Graphit. Arctic and Subarctic Natural Resources. 2016;21(3):59-62. (In Russ.)

Views: 13


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2618-9712 (Print)
ISSN 2686-9683 (Online)