Climate Resistance of Basalt Composite Reinforcement
Abstract
The results of testing of climatic resistance of basalt composite reinforcement by examining strength characteristics at columnar and static extension are presented. The object of study is a polymer composite material for building purpose which is a basalt-composite armature as unidirectional basalt-plastic rods with periodic profile and diameter from 6 to 10 mm. The rods were made by Limited liability company «TBM» on technical line «Struna» under the technical specifications 2296-001-86166796-2013 «Reinforcement of nonmetallic composite basalt». The study have shown a slight increase in strength of basalt-composite reinforcement after 20 months open-air exposure in Yakutsk.
About the Authors
Anatoliy Konstantinovich Kychkin
Larionov Institute of Physical and Technical Problems of the North SB RAS
Russian Federation
Russian Federation
Valeriy Valentinovich Popov
Larionov Institute of Physical and Technical Problems of the North SB RAS
Russian Federation
Russian Federation
Aysen Anatolievich Kychkin
Larionov Institute of Physical and Technical Problems of the North SB RAS
Russian Federation
Russian Federation
References
1. Вапиров Ю.М., Кириллов В.П., Кривонос В.В. Закономерности изменения свойств полимерных композитов конструкционного назначения при длительном климатическом старении в свободном и нагруженном состояниях // Сборник докладов VI научной конференции по гидроавиации «Гидроавиасалон – 2006». Часть II. М., 2006. С. 103–108.
2. Mohamed Amine Ammar. Bond Durability of Basalt Fibre-Reinforced Polymers (BFRP) bars under freeze-and-thaw conditions // Thesis. 2014. Quebec. Canada. 105 p.
3. Richard Parnas, Montgomery Shaw and Qiang Liu. Basalt Fiber Reinforced Polymer Composites // Technical Report NETCR63. Institute of Materials Science, University of Connecticut. 2007. 133 p.
4. Giuseppe Alaimo, Antonino Valenza, Daniele Enea, Vincenzo Fiore. The durability of basalt fibres reinforced polymer (BFRP) panels for cladding // Materials and Structures. 2015. DOI 10.1617/s11527-015-0633-3.
5. Gang Wu, Xin Wang, Zhishen Wu, Zxiqiang Dong, Guangchao Zhang. Durability of basalt fibers and composites in corrosive environments // Journal of Composite Materials. 2014 March 11. DOI: 10.1177/0021998314526628.
6. Qiang Liu, Montgomery T. Shaw, Richard S. Parnas, Anne-Marie McDonnell. Investigation of Basalt Fiber Composite Mechanical Properties for Applications in Transportation // Polymer Composites. 2006. V. 27. P. 41–48. DOI 10.1002/pc.20162.
7. Каблов Е.Н., Кириллов В.Н., Жирнов А.Д., Старцев О.В., Вапиров Ю.М. Центры для климатических испытаний авиационных ПКМ // Авиационная промышленность. 2009. №4. С.36– 46.
8. Савин В.Ф., Блазнов А.Н., Старцев О.В., Луговой А.Н., Рудольф А.Я., Волков Ю.П., Хе А.И., Киселев Н.М., Маркова А.В. Испытания упругих стержней методом продольного изгиба / Под ред. В.Ф. Савина, А.Н. Блазнова. Барнаул: Изд-во Алт. ун-та, 2009. 222 с.
9. Зеленский Э.С., Куперман А.М., Горбаткина Ю.А., Иванова-Мумжиева В.Г., Берлин А.А. Армированные пластики – современные конструкционные материалы // Журнал Рос. хим. об-ва им. Д.И. Менделеева. 2001. Т. XLV, №2. С. 56–74.
Review
For citations:
Kychkin A.K., Popov V.V., Kychkin A.A. Climate Resistance of Basalt Composite Reinforcement. Arctic and Subarctic Natural Resources. 2017;22(1):75-80. (In Russ.)
Views:
7
Email this article 